Trouble Shooting

Verify customer concern by observing indicators and gauges to determine correct operation with ignition switch in RUN position, in START position before ignition switch is released and in RUN position with engine running. Visually inspect components of instrument cluster. Inspect washer fluid level, damaged fuel tank, engine coolant level, engine oil level, brake fluid level. Inspect for loose accessory drive belt or damaged parking brake switch. Inspect for blown fuse(s), loose or corroded connectors, damaged wiring harness and damaged switches or sensors. If problem is found, repair as necessary. If no problem is found, perform self-diagnostics. See SELF-DIAGNOSTIC SYSTEM  .