LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 96 (Engine Controls - Self-Diagnostics) >> System Tests (Evaporative Emission) >> Notes

System Tests (Evaporative Emission): Notes

WARNING: This page is about a different car, the 2002 Mercury Villager. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Prior to performing any system test, see HOW TO USE SYSTEM TESTS  under SYSTEM TESTS.

Perform these tests when instructed during QUICK TEST or if directed here from another article or from DIAGNOSTIC TROUBLE CODE DEFINITIONS . Perform appropriate evaporative emission system test. See EVAPORATIVE EMISSIONS DIAGNOSTIC TROUBLE CODE DEFINITIONS . For emission-related symptom tests, see EXCESSIVE FUEL ODOR or HISSING SOUND WHEN REMOVING FUEL CAP under EVAPORATIVE EMISSION SYSTEM TESTS in SYSTEM & COMPONENT TESTING - VILLAGER article.

NOTE: To identify EVAP system components, see Fig 1.
Fig 1: Identifying EVAP System Components
G00096747Courtesy of FORD MOTOR CO.