LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 839 (Exterior Lighting) >> Diagnosis And Testing >> Reversing Lamps >> Inspection and Verification

Inspection and Verification

WARNING: This page is about a different car, the 2005 Ford RV Cutaway, 2005 Ford Econoline, 2005 Ford E450 Super Duty, and 2005 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify the customer concern.
  2. Visually inspect for obvious signs of mechanical or electrical damage.
    VISUAL INSPECTION CHART

    Mechanical Electrical
    • Digital transmission range (TR) sensor
    • Central junction box (CJB) fuse 12 (15A) (reversing lamps)
    • Circuitry
    • Bulb(s)
    • Reversing lamp relay (if equipped with TorqShift)
    • Powertrain control module (PCM) (if equipped with TorqShift)
  3. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.
  4. If the concern is not visually evident, verify the symptom and GO to SYMPTOM CHART .