Symptom Chart
WARNING: This page is about a different car, the 2005 Ford RV Cutaway, 2005 Ford Econoline, 2005 Ford E450 Super Duty, and 2005 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
REVERSING LAMPS SYMPTOM CHART
| Condition |
Possible Sources |
Action |
- The reversing lamps are inoperative
|
- Fuse
- Circuitry
- Digital transmission range (TR) sensor (if not equipped with TorqShift)
- Reversing lamp relay (if equipped with TorqShift)
- Powertrain control module (PCM) (if equipped with TorqShift)
|
|
- The individual reversing lamp is inoperative
|
|
- MEASURE the resistance between the inoperative reversing lamp connector, circuit 57 (BK), harness side and ground.
- If the resistance is less than 5 ohms, REPAIR circuit 140 (BK/PK). TEST the system for normal operation.
- If the resistance is not less than 5 ohms, REPAIR circuit 57 (BK). TEST the system for normal operation.
|
- The reversing lamps are on continuously
|
- Circuitry
- Digital TR sensor (if not equipped with TorqShift)
- Reversing lamp relay (if equipped with TorqShift)
- PCM (if equipped with TorqShift)
|
|