LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 75 (Automatic Transmission - Diagnosis - 4R70W) >> Self-Diagnostic System >> Output State Control Modes >> Notes

Output State Control Modes: Notes

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2002 Mercury Grand Marquis, 2002 Lincoln Town Car, 2002 Ford Crown Victoria, 2001 Mercury Mountaineer, and 2001 Mercury Grand Marquis. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: TR sensor and VSS must be operational to enter Output State Control (OSC) modes. No DTCs may be present for TR and VSS sensors before entering OSC modes.

OSC modes allow control of some parameters for specific operation. OSC has 2 modes of operation: Bench Mode and Drive Mode. Each mode has a unique set of vehicle operation requirements that must be met before OSC operation will be allowed. If vehicle requirements are not met, an error message will be displayed and OSC mode will be aborted. Follow OSC PRELIMINARY PROCEDURES  before entering into OSC modes.