Circuit Functions
The engine oil temperature (EOT) sensor is a thermistor type sensor that has a variable resistance that changes when exposed to different temperatures. When interfaced with the powertrain control module (PCM), it produces a 0 to 5 volt analog signal that will deduce temperature.
Cranking Fuel Quantity/Timing Control - The EOT sensor signal is used to determine the timing and quantity of fuel required to optimize starting over all temperature conditions.
Idle Speed - At oil temperatures below 70°C (158 °F) low idle is incrementally increased to a maximum of 950 rpm.
Temperature Compensation - Fuel quantity and timing is controlled throughout the total operating range to ensure adequate torque and power is available.
Glow Plug Control - The Glow Plug Control Module (GPCM) and lamp ON times are controlled by engine oil temperature.