LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 666 (Automatic Transmission - 5R110W - Excursion & F250-F550 Super Duty) >> Diagnosis And Testing >> Pinpoint Tests - OSC Equipped Vehicles >> Testing >> Pinpoint Test A: Control Solenoids

Pinpoint Test A: Control Solenoids

WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Refer to the Transmission Vehicle Harness Connector  illustration preceding these pinpoint tests.
NOTE: Refer to the Transmission Internal Harness Connector  illustration preceding these pinpoint tests.
NOTE: Read and record all DTCs. All TR-P Sensor, PCA (line pressure solenoid) and VSS DTCs must be repaired before entering Output State Control (OSC) - Service Bay Mode.
NOTE: Use the PID Chart for available diagnostic PIDs. Refer to OUTPUT STATE CONTROL (OSC) MODE .
Fig 1: Pinpoint Test A: Control Solenoids (A1-A4)
G02775490Courtesy of FORD MOTOR CO.
Fig 2: Pinpoint Test A: Control Solenoids (A5-A8)
G02775491Courtesy of FORD MOTOR CO.