LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 567 (Body Panel System - Body System - Exterior) >> Removal And Installation >> Rear Bumper - Mountaineer >> Item 6: Rear Bumper Cover Removal Note

Item 6: Rear Bumper Cover Removal Note

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Mountaineer rear bumper covers has clips located at the upper edge of the moulding that attach to the sheet metal.
    • Lift the corner of the rear bumper cover and pull away.
    • Repeat on the opposite side.
    Fig 1: Lifting Corner Of Rear Bumper Cover
    G03183732Courtesy of FORD MOTOR CO.