LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 567 (Body Panel System - Body System - Exterior) >> Removal And Installation >> Mouldings >> Item 2: Front Fender Moulding Removal Note

Item 2: Front Fender Moulding Removal Note

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. The front fender moulding is held in place by pushpins and retainer clips. After removing pushpins, pull outward on the moulding to release retainer clips.
scientia non olet · About LEMON Manuals