LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 567 (Body Panel System - Body System - Exterior) >> Diagnosis And Testing >> Wipers and Washers >> Pinpoint Test X: The Rear Wiper Wash and Wipe Function Does Not Operate >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.

Under normal operation the multifunction switch receives ground through 1302 (WH/LG). The rear wiper motor receives input from the multifunction switch through circuit 410 (WH/OG) to operate the rear wiper wash and wipe function.

scientia non olet · About LEMON Manuals