Vehicle Setup
WARNING: This page is about a different car, the 2002 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Place blocks behind the rear wheels (1007) and in front of the front wheels to prevent the vehicle from moving while the system pre-check is being done.
For 4WD vehicles, shift into 2WD. Drive the vehicle to a level area, and place the shift lever in PARK for automatic transmissions (7003) and NEUTRAL for manual transmissions. Turn the ignition off, set the parking brake, and turn on the running lamps. Place blocks behind the rear wheels and in front of the front wheels. Release the parking brake.