Red BRAKE Warning Indicator Self-Check
WARNING: This page is about a different car, the 2002 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
The red BRAKE warning indicator is used to indicate a low fluid level condition or parking brake applied condition. To check this light, insert the key in the ignition switch (11572) and turn it to the START position. The warning indicator should illuminate in this position. If the red brake warning indicator fails to illuminate, go to the SYMPTOM CHART .
Allow the key to spring back from the START position to the RUN position. At this time, the red BRAKE warning indicator should turn off. If it does not turn off, recheck the parking brake switch to make sure that it is fully disengaged. In the event that the red BRAKE warning indicator remains on, go to the SYMPTOM CHART .