LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2807 (Engine Controls - Pinpoint Tests - (Hybrid) - Pinpoint Tests HU - NC) >> Pinpoint Test NC: Ignition Engine Speed Input Circuit >> Test Procedure

Test Procedure

WARNING: This page is about a different car, the 2006 Mercury Mariner and 2006 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. NC1 CONTINUOUS MEMORY DTC P0320: ERRATIC IGNITION 
    NOTE: Verify all 2-way radio installations. Carefully follow the manufacturer's installation instructions regarding the routing of the antenna and power leads.

    Are any concerns present? 

    Yes No
    REPAIR as necessary. GO to  NC2.
  2. NC2 NO START CONCERN 

    Is the customer complaint a no start concern? 

    Yes No
    GO to Pinpoint Test A . GO to  NC3.
  3. NC3 INTERMITTENT FAULTS 

    Is this an intermittent concern? 

    Yes No
    GO to Pinpoint Test Z . GO to Pinpoint Test JD .