Remote Keyless Entry (RKE)
The Remote Keyless Entry (RKE) system uses an Integrated Keyhead Transmitter (IKT). The IKT incorporates both the Passive Anti-Theft System (PATS) functions and the RKE transmitter functions in a single device.
The RKE transmitter is programmed automatically during PATS programming. During PATS programming, the Instrument Cluster (IC) obtains the Transmitter Identification Code (TIC) from the IKT and sends the TIC data over the Medium Speed Controller Area Network (MS-CAN) to the SJB .
The SJB accepts programming of up to 4 IKTs . In addition to the IKTs , 4 conventional keyfobs can also be programmed to the vehicle if requested by the customer. Refer to Key Programming Using Two Programmed Keys or Integrated Keyhead Transmitter (IKT) Key Programming Using Diagnostic Equipment in INTEGRATED KEYHEAD TRANSMITTER (IKT) KEY PROGRAMMING USING DIAGNOSTIC EQUIPMENT or ANTI-THEFT - PASSIVE ANTI-THEFT SYSTEM (PATS) - HYBRIDINTEGRATED KEYHEAD TRANSMITTER (IKT) KEY PROGRAMMING USING DIAGNOSTIC EQUIPMENT for IKT programming information. Refer to REMOTE KEYLESS ENTRY (RKE) TRANSMITTER PROGRAMMING for keyfob programming information.
The IKT initiates the following electronic system functions:
- Unlocks the LH front door
- Unlocks all doors
- Locks all doors
- Releases the liftgate glass
- Activates/deactivates the panic alarm
- Commands the interior lamps on (when unlocking) and off (when locking)
- Provides a long flash of the turn signals when UNLOCK is pressed
- Sounds the horn once when LOCK is pressed twice within 3 seconds, and the doors are closed
- Sounds the horn twice when LOCK is pressed twice within 3 seconds, and any door is ajar
The IKT has a normal operating range of 10 m (33 ft).