LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2419 (Wheels & Tires) >> Diagnosis And Testing >> Wheels And Tires >> Pinpoint Tests >> Pinpoint Test B: Outer Edge/Shoulder Wear >> Pinpoint Test B: Outer Edge/Shoulder Wear

Pinpoint Test B: Outer Edge/Shoulder Wear

WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. B1 MEASURE THE TREAD DEPTH 
    • Using a tread depth gauge or similar tool, measure the outside edge/shoulder tread depth.
    • Is the tread depth greater than 2/32 inch? 
    • Yes:  ROTATE the wheel and tire assemblies.

      CHECK and ADJUST the toe to nominal -0.15 degrees (toe out). CHECK and ADJUST caster and camber to nominal. REFER to INSPECTION AND VERIFICATION .

    • No:  INSTALL a new tire(s). CHECK and ADJUST the toe to nominal. CHECK and ADJUST caster and camber to nominal. REFER to INSPECTION AND VERIFICATION .
scientia non olet · About LEMON Manuals