Section 2419 (Wheels & Tires)
WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
- Specifications
- Description And Operation
- Diagnosis And Testing
- Wheels And Tires
- Tire Pressure Monitoring System
- Special Tool(s)
- Principles of Operation
- Ambient Temperature Change and Tire Pressure
- Inspection and Verification
- DTC Chart
- Symptom Chart
- Pinpoint Tests
- Pinpoint Test D: Tire Pressure Monitoring System (TPMS) Indicator ON Solid and Message Center (if equipped) Displays LOW TIRE PRESSURE
- Pinpoint Test E: Smart Junction Box (SJB) Will Not Enter Sensor Training Mode When Using the Tire Pressure Monitoring System (TPMS) Sensor Training Procedure
- Pinpoint Test F: TPMS Indicator FLASHES for 70 Seconds and Then Remains ON Solid When the Ignition Key is Turned to the ON Position, the Message Center (if equipped) Displays TIRE PRESSURE SENSOR or MONITOR FAULT and DTC B2872 or B287A is Present
- Pinpoint Test G: DTC B106B
- General Procedures
- Removal And Installation
- Disassembly And Assembly
- Disassembly And Assembly Of Subassemblies