Pinpoint Tests: Notes

WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Use the correct probe adapter(s) from the Flex Probe Kit when taking measurements. Failure to use the correct probe adapter(s) may damage the connector.

NOTE: Most faults are due to connector and/or wiring concerns. Carry out a thorough inspection and verification before proceeding with the pinpoint test.

Refer to INSPECTION AND VERIFICATION , DRIVER SEAT MODULE (DSM) DTC TABLE , DRIVER DOOR MODULE (DDM) DTC TABLE , DUAL CLIMATE CONTROLLED SEAT MODULE (DCSM) DTC TABLE , HVAC MODULE DTC TABLE and the SYMPTOM TABLE for direction to the appropriate pinpoint test.