LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2326 (Exterior Lighting System) >> Removal And Installation >> Hazard Flasher Lamp Switch >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument panel upper storage compartment. For additional information, refer to REMOVAL AND INSTALLATION .
  2. Release the tabs and remove the hazard flasher lamp switch.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals