Driveshaft Center U-Joint and CV Joint Inspection
WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
With the vehicle in NEUTRAL, position it on a hoist. Refer to JACKING & LIFTING . Rotate the driveshaft by hand. Check for rough operation or seizure of the U-joints or CV joints. Install a new driveshaft if it shows signs of seizure, excessive wear or incorrect seating. Refer to REMOVAL AND INSTALLATION .