Inspection and Verification
WARNING: This page is about a different car, the 2008 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
- Verify the customer concern.
- Visually inspect for obvious signs of mechanical damage.VISUAL INSPECTION CHART
Mechanical Clutch disc Clutch pressure plate Clutch master cylinder Clutch slave cylinder Clutch pedal - If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.
- If the cause is not visually evident, verify the symptom and Go to Symptom Chart - Clutch Operation .
NOTE:
The vehicle should be road tested, if possible, to verify the customer concern. Some clutch conditions may be attributed to a misadjusted clutch pedal height, linkage or shift mechanism. These should be checked and corrected prior to attempting major disassembly procedures. Verify that the transaxle is filled to the correct level with the specified lubricant. Refer to MANUAL TRANSAXLE/TRANSMISSION
article.