LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2072 (Anti-Theft System - Pats - (Hybrid)) >> Diagnostic Tests >> Anti-Theft - Passive Anti-Theft System (PATS) >> Pinpoint Tests >> Pinpoint Test C: DTC B2141 - NVM Configuration Failure (No Transmission Control Module (TCM) ID Exchanged Between The Powertrain Control Module (PCM) And The TCM) >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2007 Mercury Mariner and 2007 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

The TCM and the PCM verify correct PATS operation through the controller area network (CAN) when the ignition switch is turned to the RUN position.

DTC B2141 - sets when the PCM and TCM IDs have not been sent.

Possible Causes