Removal & Installation
WARNING: This page is about a different car, the 2003 Ford Econoline. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Fuel in the fuel system remains under high pressure even when the engine is not running. Before repairing or disconnecting any of the fuel lines or fuel system components, the fuel system pressure must be relieved to prevent accidental spraying of fuel, causing personal injury or a fire hazard. See FUEL SYSTEM PRESSURE RELEASE .
Remove fuel tank. See appropriate procedure under FUEL TANK . Remove fuel pump retaining screws and fuel pump from fuel tank. See Fig 1. Wipe seal area of tank clean. Position NEW seal onto pump mounting flange (if necessary), using grease to hold it in position. Position fuel pump in tank to original position. Install bolts or lock ring. DO NOT overtighten lock ring, as it may leak. Install fuel tank. Tighten fasteners to specification. See TORQUE SPECIFICATIONS .