LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 200 (Engine Controls - Removal & Installation - Gasoline) >> Emission Systems & Sub-Systems >> Fuel Tank Pressure Sensor >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 2003 Ford Econoline. However, it is still accessible from the selected car via links, so may be relevant.

Fuel tank pressure sensor is located in top of fuel tank. Remove fuel tank. See FUEL TANK PRESSURE SENSOR  under SENSORS & SWITCHES. Disconnect electrical connector. Press down and rotate fuel tank pressure sensor counterclockwise and remove from fuel tank. To install, reverse removal procedure. Perform after repair procedure. See AFTER REPAIR PROCEDURE .

scientia non olet · About LEMON Manuals