LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1652 (Driveline System - General Information) >> Diagnosis And Testing >> Driveline System >> Inspection and Verification >> Driveshaft Center Universal Joint (U-Joint) and Constant Velocity (CV) Joint Inspection >> Driveshaft Center Bearing

Driveshaft Center Bearing

WARNING: This page is about a different car, the 2006 Mercury Montego, 2006 Ford Freestyle, and 2006 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.

Rotate the driveshaft by hand. If the bearing shows signs of roughness or is noisy, install a new driveshaft assembly. Refer to REMOVAL AND INSTALLATION .