LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1511 (Anti-Theft System - Pats - (Except Hybrid)) >> Removal And Installation >> Passive Anti-Theft System (PATS) Transceiver >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Mercury Mariner and 2006 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument panel steering column cover.
  2. Remove the ignition lock cylinder. For additional information, refer to HANDLES, LOCKS, LATCHES AND ENTRY SYSTEMS .
  3. Remove the 3 steering column shroud screws and the lower steering column shrouds.
  4. Remove the PATS transceiver screw.
  5. Remove the PATS transceiver.
    • Disconnect the PATS transceiver electrical connector.
    6. NOTE: No key replacement or re-initialization needs to occur with the removal or installation of a new PATS transceiver.
  6. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals