LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1341 (Engine Controls - Powertrain DTC Charts & Descriptions - (Hybrid)) >> DTC Diagnosis >> DTC P1A0C: Hybrid Powertrain Control Module - Engine Disabled

DTC P1A0C: Hybrid Powertrain Control Module - Engine Disabled

WARNING: This page is about a different car, the 2006 Mercury Mariner and 2006 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
P1A0C - HYBRID POWERTRAIN CONTROL MODULE - ENGINE DISABLED

Description:  This is an informational DTC and is set as the result of Limited Operating Strategy (LOS) or Failure Mode Effects Management (FMEM) operating strategy that maintains limited vehicle function in the event of the PCM, TCM, TBCM, or component failure.
Possible Causes: 
  • Powertrain or hybrid-electric system malfunction.
  • Positive crankcase ventilation (PCV) system.
Diagnostic Aids:  The circuit DTCs can be accompanied by the informational DTCs, and should be diagnosed first. An informational DTC without a circuit DTCs may or may not indicate the actual malfunction and should be diagnosed as a symptom.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All GO to Pinpoint Test QE .