Wire Repair: Notes
WARNING: This page is about a different car, the 2002 Ford Pickup, 2002 Ford F550 Super Duty, 2002 Ford F450 Super Duty, 2002 Ford Excursion, and 2002 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
To repair damage to sensor wiring and wiring harnesses, note following conditions and go to REPAIR PROCEDURE .
- All wire splice connections must be staggered at least 2" (50 mm) apart.
- Use proper size, waterproof butt-splice connectors on any exposed wiring.
- Use heat shrink nylon splice to prevent water, salt, condensation and heat from affecting the wiring repair.
- Use transparent splice connectors to allow inspection of finished splice.