LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 108 (Supplemental Inflatable Restraint System -- Excursion & F250-550 Super Duty) >> Removal & Installation >> Passenger-Side Air Bag Module >> Removal

Passenger-Side Air Bag Module: Removal

WARNING: This page is about a different car, the 2002 Ford Pickup, 2002 Ford F550 Super Duty, 2002 Ford F450 Super Duty, 2002 Ford Excursion, and 2002 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Before proceeding, see AIR BAG SAFETY PRECAUTIONS . Disable air bag system. See DISABLING SYSTEM  under DISABLING & ACTIVATING AIR BAG SYSTEM.
  2. Working through glove box opening, remove passenger-side air bag module mounting bolts. See Figure. Using appropriate flat-bladed tool, carefully insert tool under right bottom edge of air bag module door. Lift lower right corner of passenger-side air bag door with tool and separate from retaining clip. Separate rest of door from retaining clips by lifting door by hand. Remove air bag module through front of instrument panel.
scientia non olet · About LEMON Manuals