LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 108 (Supplemental Inflatable Restraint System -- Excursion & F250-550 Super Duty) >> Diagnostics >> Using Scan Tool

Using Scan Tool

WARNING: This page is about a different car, the 2002 Ford Pickup, 2002 Ford F550 Super Duty, 2002 Ford F450 Super Duty, 2002 Ford Excursion, and 2002 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. To retrieve continuous Diagnostic Trouble Codes (DTCs) and run self-test diagnostics, connect scan tool to Data Link Connector (DLC) following manufacturer's instructions. DLC is located under steering column.
  2. If self-test passes and no DTCs are retrieved, go to diagnostic symptoms table to continue diagnosis. See DIAGNOSTIC SYMPTOMS  table. If DTCs are retrieved, go to diagnostic trouble code identification table to continue diagnosis. See DIAGNOSTIC TROUBLE CODE (DTC) IDENTIFICATION  table. If restraints control module cannot be accessed by scan tool, go to TEST Y: NO COMMUNICATION WITH RCM  under DIAGNOSTIC TESTS.
scientia non olet · About LEMON Manuals