Circuit Function
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2005 Ford RV Cutaway, 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Excursion. However, it is still accessible from the selected car via links, so may be relevant.
The EGR actuator is a variable position valve that controls the amount of exhaust that enters the intake manifold. The EGR is controlled by the PCM using a pulse width modulated signal that varies from 0-100%. The EGR actuator consists of 2 components, a valve with an actuator (solenoid), and a position sensor to monitor valve movement. The EGR sensor is a potentiometer sensor. When the EGR receives a 5-volt reference signal and a ground from the PCM, a linear analog voltage signal from the sensor indicates the position of the EGR valve.