LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1059 (Engine Controls - Pinpoint Tests - 6.0L Diesel (99P F450/550)) >> Pinpoint Test K: Engine Coolant Temperature (ECT) Sensor >> Introduction >> Circuit Functions

Circuit Functions

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2005 Ford RV Cutaway, 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Excursion. However, it is still accessible from the selected car via links, so may be relevant.

The ECT sensor is a thermistor-type device in which resistance changes with temperature. The electrical resistance of a thermistor decreases as the temperature increases, and increases as the temperature decreases. The varying resistance affects the voltage drop across the sensor terminals and provides electrical signals to the powertrain control module (PCM) corresponding to temperature.

The engine coolant sensor is used as the primary input to the electronic control system to enable adaptive cooling. This provides a means of providing adequate cooling in severe engine temperature conditions. The PCM limits the fueling rate of the engine to provide cooling protection and prevent engine damage due to overheating.