LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 92 (Engine Removal, Overhaul & Installation - F150 Pickup - NGV) >> Air Induction Systems >> Throttle Body >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 2002 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the air cleaner resonator and outlet tube assembly. Remove the three bolts and the engine appearance cover. Disconnect the throttle position (TP) sensor electrical connector.
  2. Disconnect the accelerator cable, speed control cable, and the return spring. Remove the throttle body. Remove the bolts. Remove and discard the throttle body gasket.
  3. To install, reverse the removal procedure. Tighten bolts to specification. See TORQUE SPECIFICATIONS .
scientia non olet · About LEMON Manuals