LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 92 (Engine Removal, Overhaul & Installation - F150 Pickup - NGV) >> Torque Specifications

Torque Specifications

WARNING: This page is about a different car, the 2002 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS

Application Ft. Lbs. (N.m)
Coalescer/Fuel Filter Screws 14-19 (19-26)
Fuel Filter Cover 25-30 (34-41)
Fuel Pressure Regulator Bolt 16-23 (22-32)
Fuel Pressure Regulator To Coalescer Filter Fitting 28-36 (38-49)
Fuel Shutoff Solenoid Compression Fitting 25-26 (34-35)
Fuel Shutoff Solenoid "O" Ring Fitting 59-74 (80-108)
Fuel Tank Solenoid 200-250 (271-338)
Fuel Tank Support Strap Bolt (Bed) 29-49 (40-64)
Fuel Tank Support Strap Nut (Bed) 42-53 (58-72)
Fuel Tank Strap Bolt (Mid) 15-23 (21-32)
Fuel Tank Strap Nut (Mid) 42-53 (58-72)
Fuel Temperature Sensor 15-21 (21-29)
High Pressure Fuel Line Fitting (1) 28-42 (38-57)
Injection Pressure Sensor 15-21 (21-29)
Low Pressure Fuel Line Fitting (1) 28-42 (38-58)
Pressure Regulator Fuel Line 39-41 (53-55)
INCH Lbs. (N.m) 
Coalescer/Fuel Filter Drain Plug 71-97 (8-11)
Fuel Injection Supply Manifold Bolt 71-106 (8-12)
Fuel Pressure Relief Valve 71 (8)
Fuel Rail Bolt 71-106 (8-12)
Manual Lockdown Jackscrew 79 (9)
Override Tool Jackscrew 62-79 (7-9)
Power Brake Booster Vacuum Line Bolt 71-106 (8-12)
Throttle Body Spacer Nut 71-106 (8-12)
Throttle Body Spacer Bolt 71-89 (8-10)
42-Pin Connector Bolt 71-106 (8-12)
(1) When tightening the fuel lines, a torque wrench adapter must be used with the torque wrench. The use of a torque wrench adapter will alter the effective torque of the torque wrench being used. To correct the effective torque, a torque multiplication conversion must be used. See TORQUE MULTIPLICATION CONVERSION  under FUEL LINE FITTINGS in FUEL SYSTEMS.