LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1996 >> Aerostar Van Window >> Repair and Diagnosis >> External Pages >> Different car >> Section 253 (Front Suspension (4WD)) >> Removal & Installation >> Radius Arm >> Installation (Bronco)

Installation (Bronco)

WARNING: This page is about a different car, the 1997 Ford Ranger, 1996 Ford Ranger, and 1996 Ford Bronco. However, it is still accessible from the selected car via links, so may be relevant.

To install, reverse removal procedure. Clean and apply Loctite to radius arm-to-axle bolt and stud before installation. To install remaining components, reverse removal procedure. See TORQUE SPECIFICATIONS (BRONCO)  table.

scientia non olet · About LEMON Manuals