Torque Specifications (Bronco)
WARNING: This page is about a different car, the 1997 Ford Ranger, 1996 Ford Ranger, and 1996 Ford Bronco. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS (BRONCO)
| Application | Ft. Lbs. (N.m) | |
|---|---|---|
| Axle Pivot Bracket-To-Frame Bolt | 76-114 (103-155) | |
| Ball Joint Nut | ||
| Lower | 111 (150) | |
| Upper | 100 (136) | |
| Lower Spring Retainer-To-Radius Arm Nut | 70-100 (95-136) | |
| Radius Arm Bracket-To-Frame Bolt | 84-112 (114-152) | |
| Radius Arm-To-Axle Lower Bolt | 320-340 (434-461) | |
| Radius Arm-To-Axle Upper Stud | 240-260 (325-353) | |
| Rear Radius Arm Nut | 80-120 (109-163) | |
| Shock Absorber Mounting Bolt/Nut | ||
| Lower | 52-74 (71-100) | |
| Upper | 25-35 (34-47) | |
| Spindle-To-Steering Knuckle Nut | 35 (47) | |
| Stabilizer Bar Link-To-Bracket Bolt | 52-74 (71-100) | |
| Stabilizer Bar Retaining Nut | 27-37 (37-50) | |
| Stabilizer Bar-To-Stabilizer Link | 52-74 (71-100) | |
| Upper Spring Retainer Bolt | 13-18 (18-24) | |
| Wheel Lug Nut | 100 (136) | |