Installation (F250, F350 & F350 Super Duty Pickup)
WARNING: This page is about a different car, the 1996 Ford Ranger, 1996 Ford Pickup, 1996 Ford F-Super Duty, 1996 Ford Explorer, and 1996 Ford Bronco. However, it is still accessible from the selected car via links, so may be relevant.
Replace the clutch and brake pedal pivot shaft lever. Refer to CLUTCH PEDAL PIVOT SHAFT LEVER . To complete installation, reverse removal procedures. Bleed the hydraulic system, if necessary. Refer to HYDRAULIC SYSTEM BLEEDING . Depress clutch pedal at least 10 times to check for proper release and smooth operation. Tighten bolts to specification. See TORQUE SPECIFICATIONS ("F" PICKUP) .