Oil Pan: Installation

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 1995 Ford RV Cutaway, 1995 Ford Pickup, 1995 Ford F-Super Duty, 1995 Ford Econoline, and 1995 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

To install, reverse removal procedure. Ensure no gasket residue remains on pan or engine sealing surfaces. Apply 1/8" (3.2 mm) bead of silicone sealant on pan rails and 1/4" (6.35 mm) bead of sealant on oil pan sealing surfaces of front and rear covers.
To install remaining components, reverse removal procedure. Tighten bolts and nuts to specification. See, in this article, TORQUE SPECIFICATIONS . Fill or top off all fluids. Fill and bleed air from cooling system. See COOLING SYSTEM BLEEDING .