Cylinder Heads: Installation
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 1995 Ford RV Cutaway, 1995 Ford Pickup, 1995 Ford F-Super Duty, 1995 Ford Econoline, and 1995 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
- Install cylinder head gasket(s). Install cylinder head(s). DO NOT use sealer on head gaskets. Lightly lubricate cylinder head bolts with clean engine oil.
- Install and tighten head bolts in sequence to specification. See TORQUE SPECIFICATIONS . See Fig 1. To complete installation, reverse removal procedure. Fill and bleed air from cooling system. See COOLING SYSTEM BLEEDING .