Cylinder Head: Inspection

WARNING: This page is about a different car, the 1995 Ford Windstar. However, it is still accessible from the selected car via links, so may be relevant.

Inspect cylinder head for cracks or warpage. Machine cylinder head if warpage exceeds specification. See CYLINDER HEAD table under ENGINE SPECIFICATIONS.
CAUTION: DO NOT machine more than .010" (.25 mm) from original cylinder head thickness or cylinder block surface.
Check cylinder block deck surface. Machine cylinder block if warpage exceeds specification. See CYLINDER BLOCK table under ENGINE SPECIFICATIONS.

CAUTION: Always use NEW cylinder head bolts. Apply sealant to threads of short cylinder head bolts ONLY. Coat all other cylinder head bolts with engine oil before installing.