Cylinder Head: Inspection
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 1995 Ford RV Cutaway, 1995 Ford Pickup, 1995 Ford F-Super Duty, 1995 Ford Econoline, and 1995 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
Measure cylinder head and cylinder block mating surfaces for warpage. If cylinder head or cylinder block warpage exceeds specification, DO NOT remove more than .010" (.25 mm) material from original surface of cylinder head or block to correct warpage. See CYLINDER HEAD table under ENGINE SPECIFICATIONS.