Cylinder Head Specifications

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 1995 Ford RV Cutaway, 1995 Ford Pickup, 1995 Ford F-Super Duty, 1995 Ford Econoline, and 1995 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

CYLINDER HEAD

Application

In. (mm)

Maximum Warpage ⁽¹⁾

.003 (.08)

Valve Seats

Seat Angle

45°

Seat Width

.060-.080 (1.52-2.03)

Maximum Seat Runout

.002 (.05)

Valve Guides

Valve Guide Bore I.D.

.3433-.3443 (8.720-8.745)

Valve Stem-To-Guide Oil Clearance

.0010-.0027 (.025-.069)

⁽¹⁾	Specification is taken within any 6" (152 mm) area. Overall warpage is .006" (.15 mm). DO NOT machine more than .010" (.25 mm) from original cylinder head thickness.