LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1996 >> Aerostar Van Window >> Repair and Diagnosis >> External Pages >> Different car >> Section 140 (Engine - 4.9L 6-CYL - VIN [Y]) >> Overhaul >> Cylinder Head >> Valve Seat

Valve Seat

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 1996 Ford Pickup, 1996 Ford Econoline, 1996 Ford Club Wagon, 1996 Ford Cab & Chassis, and 1995 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

Ensure valve seat angle, seat width and seat runout are within specification. See CYLINDER HEAD  table under ENGINE SPECIFICATIONS. Valve seats must be ground when valve guide is reamed or replaced. Seat replacement information is not available from manufacturer.

scientia non olet · About LEMON Manuals