Cylinder Head Specifications

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 1996 Ford Pickup, 1996 Ford Econoline, 1996 Ford Club Wagon, 1996 Ford Cab & Chassis, and 1995 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

CYLINDER HEAD

Application

In. (mm)

Maximum Warpage

⁽¹⁾

Valve Seat Angle

45°

Valve Seat Width

Intake

.060-.080 (1.52-2.03)

Exhaust

.070-.090 (1.78-2.29)

Maximum Seat Runout

.002 (.05)

Valve Guides

Intake & Exhaust Valve Guide I.D.

.3433-.3443 (8.720-8.745)

Stem-To-Guide Clearance

Standard

.0010-.0027 (.025-.069)

Wear Limit

.0055 (.140)

⁽¹⁾	No more than .006" (.15 mm) within a 6" (152 mm) area, and no more than .010" (.25 mm) overall. DO NOT remove more than .010" (.25 mm) material from original surface if machining is required.