LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1996 >> Aerostar Van Window >> Repair and Diagnosis >> External Pages >> Different car >> Section 140 (Engine - 4.9L 6-CYL - VIN [Y]) >> Overhaul >> Cylinder Head >> Valve Seat Correction Angles

Valve Seat Correction Angles

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 1996 Ford Pickup, 1996 Ford Econoline, 1996 Ford Club Wagon, 1996 Ford Cab & Chassis, and 1995 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

Grind valve seat to a true 45-degree angle. If seat width is too wide after grinding, use a 30-degree stone to lower seat or a 60-degree stone to raise seat. See CYLINDER HEAD  table under ENGINE SPECIFICATIONS.

scientia non olet · About LEMON Manuals