Valve Lifters: Installation
WARNING: This page is about a different car, the 1995 Ford Aerostar. However, it is still accessible from the selected car via links, so may be relevant.
- Lubricate lifter and cylinder block bore with Oil Conditioner (D9AZ-19579-D) or heavy engine oil. Install lifter in original location, with alignment tab in locating groove of bore. See Fig 1. Ensure lifters slide freely in bore.
- To install cylinder head, reverse removal procedure. See CYLINDER HEAD . Tighten bolts and nuts to specification. See TORQUE SPECIFICATIONS . To install remaining components, reverse removal procedure.