Torque Specifications
WARNING: This page is about a different car, the 1995 Ford Aerostar. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Application |
Ft. Lbs. (N.m) |
| Bellhousing-To-Engine Bolt |
28-38 (38-51) |
| Camshaft Sprocket Bolt |
44-50 (60-68) |
| Connecting Rod Nut |
18-24 (25-32) |
| Crankshaft Damper-To-Crankshaft Bolt |
| Step 1 |
30-37 (40-50) |
| Step 2 |
Additional 80-90° |
| Cylinder Head Bolt |
| Step 1 |
22-26 (30-35) |
| Step 2 |
52-56 (70-76) |
| Step 3 |
Additional 90 Degrees |
| Engine Mount-To-Crossmember Nut |
72-97 (98-131) |
| Engine Mount-To-Engine Bolt |
44-59 (60-80) |
| Exhaust Manifold Bolt |
18 (25) |
| Fan Clutch |
30-100 (40-135) |
| Flexplate-To-Torque Converter Bolt |
33-45 (45-61) |
| Flywheel-To-Crankshaft Bolt |
| Step 1 |
10 (14) |
| Step 2 |
53 (72) |
| Lower Intake Manifold Bolts/Nuts |
| Step 1 |
|
| Step 2 |
11 (15) |
| Step 3 |
16 (22) |
| Main Bearing Cap Bolt |
66-77 (90-104) |
| Oil Level Sensor |
13-20 (17-27) |
| Oil Pump Retaining Bolt |
13-15 (17-21) |
| Power Steering Bracket Bolt |
30-40 (41-54) |
| Rear Mount-To-Crossmember Nut |
65-87 (88-118) |
| Rear Mount-To-Transmission Bolt |
60-80 (81-109) |
| Rocker Arm Assembly Bolt |
46-52 (62-70) |
| Starter Bolt |
15-20 (20-27) |
| Timing Chain Cover Bolt |
13-15 (17-21) |
| Transmission Crossmember Bolt |
65-87 (88-118) |
| Upper Intake Manifold Bolt |
15-18 (20-25) |
| INCH Lbs. (N.m) |
| Camshaft Thrust Plate Bolt |
80-115 (9-13) |
| Oil Pan Bolt/Nut |
62-89 (7-10) |
| Oil Pan-To-Transmission Bolt |
62-89 (7-10) |
| Valve Cover Bolt |
54-71 (6-8) |
| Water Pump Bolt |
71-108 (8-12) |