Timing Chain Cover: Installation
WARNING: This page is about a different car, the 1995 Ford Aerostar. However, it is still accessible from the selected car via links, so may be relevant.
- Clean timing chain cover mating surfaces. Apply sealing compound to gasket surfaces. Place NEW timing chain cover gasket into position. Replace crankshaft seal. Position timing chain cover on engine. Insert bolts in their original location.
- Tighten bolts to specification. See TORQUE SPECIFICATIONS . Apply silicone sealer to crankshaft keyway. To complete installation, reverse removal procedure. Install oil pan. See OIL PAN. Fill or top off all fluids. Fill and bleed air from cooling system. Refer to COOLING SYSTEM BLEEDING .