LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1992 >> Explorer 4D Utility, RWD, Automatic >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> 4.0L V6 - VIN [X] >> Removal & Installation >> Valve Lifters >> Installation

Valve Lifters: Installation

  1. Lubricate lifter and cylinder block bore with Oil Conditioner (D9AZ-19579-CA) or heavy engine oil. Install lifter in original location, with alignment tab in locating groove of bore. See Fig 1. Ensure lifters slide freely in bore.
  2. To install cylinder head, reverse removal procedure. See CYLINDER HEAD . Tighten retaining bolts/nuts to specification. See the TORQUE SPECIFICATIONS  table. To install remaining components, reverse removal procedure.
Fig 1: Installing Hydraulic Lifters
G90G15475Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals