LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1992 >> Explorer 4D Utility, RWD, Automatic >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> 4.0L V6 - VIN [X] >> Removal & Installation >> Timing Chain Cover >> Installation

Timing Chain Cover: Installation

  1. Clean timing chain cover mating surfaces. Apply sealing compound to gasket surfaces. Place NEW timing chain cover gasket into position. Replace crankshaft seal. Position timing chain cover on engine. Insert bolts in their original location.
  2. Tighten bolts to specification. See TORQUE SPECIFICATIONS . Apply silicone sealer to crankshaft keyway. To complete installation, reverse removal procedure. Install oil pan. See OIL PAN . Fill or top off all fluids. Fill and bleed air from cooling system. See COOLING SYSTEM BLEEDING .
scientia non olet · About LEMON Manuals