LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1992 >> Crown Victoria Base, AOD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 4.6L V8 - VIN [W] >> Removal & Installation >> Front Cover R & I >> Installation

Front Cover R & I: Installation

  1. To install, reverse removal procedure. Apply Sealant (E3AZ-19562-A) at front cover-to-oil pan, cylinder block and camshaft cover area.
  2. Apply silicone sealant to keyway of crankshaft damper before installing. Tighten bolts to specification. See, at end of article, TORQUE SPECIFICATIONS  table.
Fig 1: Exploded View of Front Cover
G91C07205Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals